Your Location: Home > How To Read Older GM Codes For Free
elm327 ad

How To Read Older GM Codes For Free


How To Read Older GM Codes For Free                                                                       


If you own a 1982 to 1995 GM car or truck, you just might be able to read your trouble codes for free! If you have a connector like this under your dash, read on... (note: this connector may have a black plastic cover over it, so also look for a cover shaped like this, sorry for the messy wires here)
This is referred to as the Assembly Line Communication Link (ALDL) connector.

How to read the codes
 
1. Ground terminals A and B (see diagram below) with the ignition "ON" and engine not running. The system will enter the diagnostic mode. In this mode, the computer will display a Code 12, three consecutive times, by flashing the "CHECK ENGINE", "SERVICE ENGINE SOON" or "MALFUNCTION INDICATOR LAMP" or light. A Code 12 consists of one flash, a short pause, then two flashes in rapid succession.
 
2. After Code 12 is displayed, any stored trouble codes will be displayed by flashing the "CHECK ENGINE", "SERVICE ENGINE SOON" or "MALFUNCTION INDICATOR LAMP" light. All codes are displayed 3 times each then a code 12 will repeat. In the diagnostic mode, the computer will also energize all computer controlled relays and solenoids.
 
ALDL Diagnostics Connector (Located Underdash)

elm327 ad
Previous:From dongles to diagnostics, here’s all you need to know
Next:The importance of keeping the OBD connector

You May Like

​WHAT IS OBD?

​WHAT IS OBD?

​OBD-II Background

​OBD-II Background

​Does My Car Have OBD-II?

​Does My Car Have OBD-II?